The best camera mounts depend on what you are attaching and where you need to place it, from a field monitor on a cage to a camera above a desk. These options cover clamps, articulated arms, monitor holders, and model-specific cages, so check mounting points, fit, and load limits before choosing.
Quick Top Products
SmallRig 1138 Double Ball Head Super Clamp
- Clamps to rods, tubes, tables, and frames.
- Includes a 1/4-inch screw and action camera adapter.
- Maximum load is 1.5 kg.
Best For: Creators who need to position a camera, light, microphone, or monitor on a rod, tube, table, or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit 2732
- Includes a 9.8-inch arm and a super clamp.
- Clamp accepts 15 mm to 54 mm supports.
- Both ends of the arm use 1/4-inch screws.
Best For: Filmmakers who need to position a monitor, light, or microphone away from a clamped support point.
SmallRig BSE2346 Cold Shoe Monitor Mount
- Fits 5- and 7-inch field monitors up to 1.2 kg.
- Attaches through a cold shoe and 1/4-20 screw.
- Swivels 360 degrees and tilts 140 degrees.
Best For: Camera operators mounting a 5- or 7-inch field monitor directly on a cold shoe.
SmallRig 12.9-Inch Magic Arm Clamp
- 12.9-inch articulated arm with a 360-degree adjustable ball head.
- 1/4-20 screw and telescopic pin help resist device deflection.
- Maximum load is 1.5 kg.
Best For: Creators who want a longer articulated clamp arm with an anti-deflection mounting connection.
SmallRig Magic Arm Clamp Kit
- Clamp grips flat surfaces and round tubes.
- One knob adjusts the arm position.
- Recommended load capacity is 1.5 kg; action camera mount included.
Best For: Users who want a short, one-knob clamp and arm kit for small cameras or accessories.
SmallRig 7-Inch Magic Arm Clamp 5310
- 7-inch arm and clamp accommodate 15 mm to 40 mm supports.
- 1/4-20 screw and retractable pins resist twisting.
- Maximum payload is 1.5 kg.
Best For: Vloggers and streamers who need a compact arm for a monitor, action camera, light, or microphone.
SmallRig 11-Inch Magic Arm Clamp 5311
- 11-inch arm for longer accessory reach.
- Clamp fits supports from 15 mm to 40 mm.
- Maximum payload is 1.5 kg.
Best For: Vloggers and studio creators who need extra reach from a clamp-mounted accessory arm.
SmallRig Super Clamp with GoPro Adapter
- Clamp fits rods from 14 mm to 60 mm and surfaces up to 65 mm thick.
- Includes a removable action camera adapter.
- Maximum load is 3.5 kg.
Best For: Action-camera users or rig builders who need a clamp that fits both bars and thicker surfaces.
SmallRig 15–35-Inch Desk Clamp Stand
- C-clamp fits desks up to 1.85 inches thick.
- Detailed height range is 19 to 39 inches with head and clamp.
- 1/4-inch ball head supports up to 3 kg.
Best For: Streamers and tabletop creators who need an elevated camera, phone, or ring light on a desk.
SmallRig 4102B Action Camera Clamp Mount
- Clamp fits rods from 14 mm and surfaces up to 65 mm thick.
- Includes a removable action camera adapter and rotating ball head.
- Motion guidance limits payload to 350 g and speed below 50 km/h.
Best For: Action-camera users mounting a compatible camera or light on a bike or motorcycle handlebar.
Flexible Clamp for Multiple Accessories
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 pairs a super clamp with a double ball head and includes an action camera adapter. Its 1/4-inch screw supports cameras, webcams, monitors, lights, and microphones, while the clamp secures to a rod, tube, table, or frame without drilling.
The aluminum and stainless steel build has a stated maximum load of 1.5 kg. This compact option suits setups that need an adjustable accessory mount at an improvised position.
For use in a moving setup, plan a safety rope as advised in the product notes, and keep the payload within the stated limit.
Best For: Creators who need to position a camera, light, microphone, or monitor on a rod, tube, table, or frame.
| Pros | Cons |
|---|---|
|
|
Choose this mount when you want to attach a small camera or accessory to a nearby support and need ball-head positioning. It offers a straightforward mix of clamping and threaded mounting, with an action camera adapter included.
Compare it with the longer 9.8-inch arm if reach matters, or with the double-clamp model if you need to connect two support points. Check that the surface or tube fits the clamp and that your attached gear stays within 1.5 kg.
Long Reach Articulating Arm Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This SmallRig kit combines a super clamp and a 9.8-inch articulating arm with 1/4-inch screws at both ends. The clamp accepts surfaces or supports between 15 mm and 54 mm and has 1/4-inch and 3/8-inch threads.
Its double ball-head design rotates 360 degrees, giving more reach and positioning flexibility than a simple ball-head clamp. Rubber cushions on the clamp and arm help grip the support and reduce scratching.
It fits a rig that needs an accessory held off to one side, but the product notes do not give a load rating, so check payload suitability before mounting heavier equipment.
Best For: Filmmakers who need to position a monitor, light, or microphone away from a clamped support point.
| Pros | Cons |
|---|---|
|
|
Pick this kit when mounting distance and repositioning are more important than a minimal footprint. Its 9.8-inch arm can place an accessory away from the clamp, while the two threaded clamp sizes support different rigging arrangements.
The supplied facts do not provide a maximum payload, so verify that separately for your camera or monitor. Also confirm the support falls within the 15 mm to 54 mm clamp range and avoid seawater exposure.
Cold Shoe Monitor Holder for 5- and 7-Inch Displays
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The SmallRig BSE2346 attaches a field monitor to a camera or other system through a cold shoe and secures the display with a 1/4-20 screw. It supports 5- and 7-inch monitors up to 1.2 kg.
The holder swivels 360 degrees horizontally and tilts up to 140 degrees, so you can adjust the viewing position without changing the rest of the rig. Rubber cushions help prevent scratches and improve friction at the contact point.
This is a focused choice for display mounting; check that your camera has the required cold shoe and that your monitor remains within the supported size and weight.
Best For: Camera operators mounting a 5- or 7-inch field monitor directly on a cold shoe.
| Pros | Cons |
|---|---|
|
|
Choose this holder when the main job is mounting a 5- or 7-inch monitor on a camera cold shoe. Its 1.2 kg capacity and 140-degree tilt are clearly specified, which helps match it to a display setup.
An ARRI-style holder may better suit a cage with locating points, while a shoe-free cage might need another mounting path. Check both the monitor weight and the available cold shoe before buying.
12.9-Inch Arm with Anti-Deflection Connection
SMALLRIG 12.9 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
SmallRig's 12.9-inch magic arm clamp combines a crab-shaped clamp with a 360-degree adjustable arm. One end uses a 1/4-20 screw and telescopic pin, with a hand-tightened screw and a wrench hole for added tightening.
The clamp's horseshoe block adjusts to flat or tubular objects, and silicone padding adds grip while protecting the surface. The stated load limit is 1.5 kg.
At 378 g, it is a more substantial piece of support gear than a small ball head, but its longer reach can help position an action camera, monitor, light, or microphone away from a bar or table edge.
Best For: Creators who want a longer articulated clamp arm with an anti-deflection mounting connection.
| Pros | Cons |
|---|---|
|
|
This arm is a fit when a compact clamp cannot place the camera or accessory far enough from the support. Its telescopic locating pin and added wrench tightening provide a more secure connection arrangement for compatible accessories.
The tradeoff is weight and payload: at 378 g, it is not the lightest mount, and the maximum load is 1.5 kg. Confirm the clamp can seat on your chosen support and that your accessory uses the compatible 1/4-20 mounting point.
Compact Clamp Kit with Integrated Anti-Deflection Design
SMALLRIG Magic Arm Clamp Kit, Camera Mount Friction Arm with Super Clamp
This SmallRig kit combines a crab clamp and magic arm with an integrated anti-deflection connection and includes an action camera mount. Its triangular friction block rotates to grip flat surfaces as well as round tubes, such as table edges and tripod supports.
One knob adjusts the accessory position, and the recommended load capacity is 1.5 kg. The aluminum alloy and stainless steel construction has cushions at the clamp and arm contact points.
It is suited to small cameras, monitors, lights, webcams, and microphones. Consider it for a simple clamp-based setup, while checking that the available reach suits your position since an arm length is not specified.
Best For: Users who want a short, one-knob clamp and arm kit for small cameras or accessories.
| Pros | Cons |
|---|---|
|
|
Select this kit for a small accessory when you value a simple one-knob adjustment and a clamp shaped to grip different surfaces. Its 1.5 kg recommended capacity gives a clear upper guide for choosing a load, and the action camera adapter broadens the setup options.
If exact positioning distance is central, compare it with the 9.8- or 12.9-inch arm models, whose lengths are specified. Confirm your accessory's thread and the clamp's fit to the support.
Short 7-Inch Arm for Compact Rigs
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The SmallRig 5310 pairs a 7-inch magic arm with a crab-shaped clamp for tubes, tripod legs, tables, and stabilizer rings measuring 15 mm to 40 mm in diameter. Its end has a 1/4-20 screw and retractable pins, with a knurled thumbscrew for tool-free fastening and an included Allen wrench for added tightening.
The arm joints loosen together through a wing nut, then lock when tightened. Maximum payload is 1.5 kg.
This shorter format can suit vlogging or streaming setups where a longer arm would take up extra room, while retaining adjustable positioning and anti-twist features.
Best For: Vloggers and streamers who need a compact arm for a monitor, action camera, light, or microphone.
| Pros | Cons |
|---|---|
|
|
Choose the 5310 when you need an adjustable clamp arm but want a shorter 7-inch reach. It shares the 1.5 kg payload and 15 mm to 40 mm clamp range of the 11-inch 5311, making arm length the practical distinction between them.
The retractable locating pins can help keep compatible accessories from twisting. Measure the support point and consider how far the accessory needs to sit from it before choosing this shorter version.
11-Inch Arm for Vlogging and Studio Setups
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The SmallRig 5311 extends the magic arm to 11 inches while retaining a crab-shaped clamp and 1/4-20 screw with retractable pins. The clamp fits tubes, tables, tripod legs, or stabilizer rings from 15 mm to 40 mm and uses anti-slip pads.
A wing nut loosens all joints together for repositioning, then locks them in place. The maximum payload is 1.5 kg.
Its additional reach compared with the 7-inch 5310 can help place a light, microphone, monitor, or action camera farther from the support. The tradeoff is a larger folded footprint, so match arm length to the space and leverage of your setup.
Best For: Vloggers and studio creators who need extra reach from a clamp-mounted accessory arm.
| Pros | Cons |
|---|---|
|
|
The 5311 is the better fit of the two specified arm lengths when the camera accessory needs to sit farther from the clamp. Its support range and payload match the 7-inch model, so the core choice is placement distance and storage space.
Longer arms can make positioning easier but need room around the rig. Check your support diameter, ensure the payload stays within 1.5 kg, and verify the accessory can use the 1/4-20 screw and locating pins.
Wide-Range Clamp with GoPro Adapter
SMALLRIG Super Clamp Mount, Ballhead Magic Arm and Adapter for Gopro
This SmallRig clamp includes a removable action camera adapter and has both 1/4-20 and 3/8-16 threaded holes for accessories such as monitors, lights, cameras, and microphones. The jaw accepts rods from 14 mm to 60 mm and surfaces up to 65 mm thick, giving it a broader documented range than several compact clamps.
Its maximum load is 3.5 kg. Anti-slip cushions and a hex-tightened bottom ball head add stability to the mounting arrangement.
This option is useful when support sizes vary or an action camera adapter is part of the setup. Check that the surface falls within the jaw range and the complete rig stays below the load limit.
Best For: Action-camera users or rig builders who need a clamp that fits both bars and thicker surfaces.
| Pros | Cons |
|---|---|
|
|
Choose this clamp if support size varies or you need the included action camera adapter alongside standard threaded mounting. Its 14 mm to 60 mm rod range and surface fit up to 65 mm are useful selection details, while the 3.5 kg maximum is higher than the arm kits rated at 1.5 kg.
This is a clamp mount rather than a long articulated arm kit, so check whether its positioning arrangement provides the reach you need. Keep the total mounted load within the stated limit.
Adjustable Desktop Camera and Light Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This SmallRig desktop stand uses a C-clamp to attach to a table up to 1.85 inches thick and extends to a listed 19–39-inch height with the ball head and clamp. Its three-section pole, 1/4-inch ball head, and ring light adapter accommodate a camera, smartphone, or ring light.
The head rotates 360 degrees and tilts from -90 to +45 degrees, with a stated maximum load of 3 kg. At 430 g, it is designed as a compact desk alternative to a floor tripod.
Check tabletop thickness and available overhead clearance, and note that the product title's 15–35-inch range differs from the detailed height range.
Best For: Streamers and tabletop creators who need an elevated camera, phone, or ring light on a desk.
| Pros | Cons |
|---|---|
|
|
This stand suits a fixed desk setup for streaming, interviews, or tabletop filming, especially when floor space is limited. Its 3 kg capacity, 360-degree rotation, and tilt range cover varied camera angles, while the C-clamp secures to a desk up to 1.85 inches thick.
Verify the actual height range against your required framing because the title and detailed specifications differ. Also check that the desk edge is accessible and that the clamp can close securely.
Handlebar Clamp with Motion-Specific Load Guidance
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
The SmallRig 4102B is a crab-shaped clamp with a removable action camera adapter, 1/4-20 and 3/8-16 threaded holes, and a 360-degree ball head. Its jaw fits rods from 14 mm and surfaces up to 65 mm thick, including bike or motorcycle handlebars.
The stated maximum load is 3.5 kg at rest, but the motion guidance is much lower: up to 350 g, on terrain that is not rough, and below 50 km/h, with a safety cord. Those limits matter for a moving camera mount.
Match the camera and accessories to the motion-specific guidance rather than the at-rest rating.
Best For: Action-camera users mounting a compatible camera or light on a bike or motorcycle handlebar.
| Pros | Cons |
|---|---|
|
|
Choose this mount specifically for handlebar or other moving-support use where its motion guidance can be followed. Although the at-rest maximum is 3.5 kg, the specified moving payload is only 350 g, with a speed limit below 50 km/h, avoidance of rough terrain, and a safety cord.
Those conditions are more relevant for riding than the static capacity. Check the bar diameter or surface thickness, calculate the full mounted weight, and follow the lower motion limit.
How to Choose Camera Mounts
How We Picked Camera Mounts
We selected products that directly support or position a camera, monitor, light, microphone, or action camera, then compared how they attach and what they fit. The roundup covers clamp mounts for tables and bars, articulated arms for adjustable reach, a dedicated cold-shoe monitor holder, a desk stand, and a motion-oriented handlebar clamp.
Model-specific cages, power accessories, and handgrips serve narrower rig-building needs, so they are not included as general mount options.
The practical fit details differ by design. For example, the 9.8-inch arm accepts 15 mm to 54 mm supports, the 5310 and 5311 clamps fit 15 mm to 40 mm supports, and the wider-range clamp accepts rods from 14 mm to 60 mm or surfaces up to 65 mm thick.
Those ranges help narrow choices before considering adjustment or reach.
Comparing Camera Mounts by Setup
Start with the attachment point. A cold-shoe monitor holder suits a camera with a shoe and a 5- or 7-inch display.
A clamp kit is more flexible when you can grip a table edge, support bar, or tripod leg. The desk stand provides a taller fixed support from a desk edge, while a handlebar clamp is designed around riding use and has a separate, much lower moving payload limit.
Next compare reach and angle. The 7-inch 5310 is suited to tighter placement, while the 11-inch 5311 and 12.9-inch arm extend farther.
The 9.8-inch kit offers 360-degree ball-head adjustment, and the monitor holder provides a defined 360-degree swivel with 140-degree tilt. Match the length and adjustment range to where the screen or camera needs to sit, with enough room to tighten joints.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig 1138 Double Ball Head Super ClampCheck Price |
| Creators who need to position a camera, light, microphone, or monitor on a rod, tube, table, or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp Kit 2732Check Price |
| Filmmakers who need to position a monitor, light, or microphone away from a clamped support point. |
| SmallRig BSE2346 Cold Shoe Monitor MountCheck Price |
| Camera operators mounting a 5- or 7-inch field monitor directly on a cold shoe. |
| SmallRig 12.9-Inch Magic Arm ClampCheck Price |
| Creators who want a longer articulated clamp arm with an anti-deflection mounting connection. |
| SmallRig Magic Arm Clamp KitCheck Price |
| Users who want a short, one-knob clamp and arm kit for small cameras or accessories. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Vloggers and streamers who need a compact arm for a monitor, action camera, light, or microphone. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and studio creators who need extra reach from a clamp-mounted accessory arm. |
| SmallRig Super Clamp with GoPro AdapterCheck Price |
| Action-camera users or rig builders who need a clamp that fits both bars and thicker surfaces. |
| SmallRig 15–35-Inch Desk Clamp StandCheck Price |
| Streamers and tabletop creators who need an elevated camera, phone, or ring light on a desk. |
| SmallRig 4102B Action Camera Clamp MountCheck Price |
| Action-camera users mounting a compatible camera or light on a bike or motorcycle handlebar. |
Check Compatibility and Load Limits
Mounting threads and locating points determine whether the pieces fit together. Several clamps offer 1/4-20 or 3/8-16 threaded holes, while the 5310 and 5311 arms use a 1/4-20 screw with retractable pins.
The monitor holder in this selection attaches through a cold shoe and uses a 1/4-20 screw at the display. Confirm the connection points on both the camera accessory and the support before ordering.
Use the load limit for the exact product and situation. The 1138 and arm kits have 1.5 kg limits or recommendations, the broad-range clamp is rated up to 3.5 kg, and the BSE2346 monitor holder supports up to 1.2 kg.
The 4102B handlebar mount has an at-rest maximum of 3.5 kg, but motion guidance lowers the payload to 350 g and specifies riding conditions. Apply the relevant figure to the complete mounted setup, including any attached accessory.
Choosing a Camera Mount for Your Work
For a field monitor on a camera with a cold shoe, consider the BSE2346 and verify the display's size and weight. For a compact vlogging or streaming rig, the 7-inch 5310 offers a shorter arm, while the 11-inch 5311 gives more positioning distance.
Choose the 12.9-inch arm when its extra reach and locating-pin connection fit your accessory.
For overhead or elevated desk shots, the C-clamp stand gives adjustable height and camera angle, provided your table is within its thickness limit. For action-camera mounting across varied bars or surfaces, the broad-range clamp includes an adapter; for a bike or motorcycle, use the 4102B only within its motion-specific guidance.
Compare the actual support dimensions, connection type, reach, and load before settling on a setup.